Put the Equipment You Already Own to Work
More Capability Without Another Machine
Your machine already brings power to the job.
Your wheelbarrow already reaches the areas where larger equipment cannot.
THE ORIGINAL W.I.T.C.H.™ BRINGS THEM TOGETHER.
Instead of purchasing another dedicated material-moving machine, The W.I.T.C.H.™ uses compatible equipment your crew may already own to create a faster, more flexible way to move material.
The machine handles the distance.
The wheelbarrow handles the placement.
USE THE POWER ALREADY ON THE JOB.
Your stand-on mower, ride-on machine, tractor, ATV, or UTV already has the power to move across the property.
But that power is not normally being used to transport the wheelbarrows your crew is pushing by hand.
The W.I.T.C.H.™ puts that available machine power to work.
A compatible tow-capable machine equipped with a properly installed rear 2-inch receiver can tow a loaded wheelbarrow across the jobsite, release it for normal hand-controlled placement, and reconnect for the next trip.
You are not adding another engine to the job.
You are getting more value from the power already there.
KEEP USING THE WHEELBARROW.
The W.I.T.C.H.™ does not replace the wheelbarrow.
It expands what the wheelbarrow can do.
Your crew can continue using a familiar, compatible wheelbarrow for:
- Loading
- Machine-assisted transport
- Tight-area access
- Final positioning
- Controlled dumping
- Spreading and placement
The material remains in the same wheelbarrow from the loading area to final placement.
No separate material container is needed.
No transfer from a cart into a wheelbarrow is required.
No new final-placement method has to be learned.
The wheelbarrow stays a wheelbarrow.
It simply no longer has to be pushed over the entire distance.
AVOID ANOTHER DEDICATED MACHINE.
Many material-moving alternatives require another powered machine, specialized carrier, or dedicated hauling system.
That can mean another piece of equipment to:
- Purchase
- Finance
- Insure
- Maintain
- Store
- Transport
- Secure on the trailer
- Train employees to operate
- Keep available for occasional use
It also takes up trailer and shop space.
The W.I.T.C.H.™ takes a different approach.
It adds capability to compatible equipment already serving the job.
Rather than replacing the machine or the wheelbarrow, it connects them into one material-moving system.
Use the machine already going to the job.
Use the wheelbarrows already in the crew’s workflow.
Add the connection that lets them work together.
LESS EQUIPMENT TO STORE AND TRANSPORT.
Trailer and shop space matter.
Every additional machine or large attachment takes up room. It must be stored between jobs, transported to the property, secured on the trailer, and kept out of the crew’s way when it is not being used.
The W.I.T.C.H.™ is a compact mechanical system designed to work with compatible equipment already going to the jobsite.
That means less pressure to find room for another dedicated material carrier.
Use the machine already on the trailer.
Use the wheelbarrows already part of the workflow.
Add the connection that lets them work together.
A LOW-MAINTENANCE MECHANICAL SYSTEM.
The W.I.T.C.H.™ does not have its own:
- Engine
- Battery
- Powered drivetrain
- Hydraulic system
- Charging system
- Fuel system
Its mechanical design uses steel structural components and long-life composite bushings.
The bushings require no greasing.
There is no separate engine-service schedule, fuel supply, or battery to charge before the workday begins.
Routine inspection and cleaning are still important, but The W.I.T.C.H.™ does not add the maintenance demands of another powered machine.
Connect it.
Use it.
Keep it working.
FAMILIAR EQUIPMENT. FASTER ADOPTION.
New equipment can slow a crew down before it makes the crew faster.
Employees may need to learn:
- New controls
- New handling characteristics
- New loading methods
- New storage procedures
- New maintenance routines
The W.I.T.C.H.™ builds around equipment and movements crews already understand.
The operator uses the machine.
The placement worker uses the wheelbarrow.
The difference is what happens between the material source and the placement area.
Instead of pushing the loaded wheelbarrow over the entire route, the crew can tow it across the open distance and release it where hand control is needed.
The workflow improves without forcing the crew to abandon familiar tools.
ADD MORE WHEELBARROWS—NOT MORE COMPLETE SYSTEMS.
Compatible wheelbarrows can be equipped with Key-Bars and made ready to work with The W.I.T.C.H.™.
Adding another Key-Bar can put another wheelbarrow into the rotation without requiring another complete hitch system.
That allows the workflow to grow with the job.
Two wheelbarrows may be enough for one property.
A larger job may use four, five, six, or more.
One wheelbarrow can be loading.
One can be in transport.
One can be used for placement.
One can be returning empty.
The crew gains more working capacity without multiplying equipment cost at the same rate.
PUT COMPATIBLE TOW CARTS TO WORK TOO.
With the Tow Cart Adapter, The Original W.I.T.C.H.™ can also add value to a compatible tow cart.
The cart can be used to:
- Move a larger volume of material
- Stage material near a work area
- Remain at the destination for hand placement
- Dump material in open areas where machine access allows
After releasing or emptying the cart, the operator can return to moving wheelbarrows through the continuous workflow.
Use the tow cart for volume.
Use the wheelbarrows for access and precise placement.
Use the machine for distance.
One connection system can support more than one material-moving need.
WHAT DOES YOUR SETUP NEED?
A typical Wheelbarrow Tow & Hand Placement setup includes:
- A compatible tow-capable machine
- A properly installed rear 2-inch receiver
- The Original W.I.T.C.H.™
- A compatible standard wheelbarrow
- A properly installed Key-Bar
Some machines may already have a suitable rear 2-inch receiver.
Others may require a compatible receiver mount before The W.I.T.C.H.™ can be installed.
The goal is not to replace the equipment you own.
It is to make sure the equipment you own can work together safely and effectively.
ONE RECEIVER. MORE WAYS TO USE THE MACHINE.
Installing a properly rated rear 2-inch receiver does more than prepare the machine for The W.I.T.C.H.™.
It creates a versatile connection point that may also allow the machine—using the correct rated hitch, drawbar, or adapter—to work with other compatible equipment you already own, such as:
- Aerators
- Dethatchers
- Rollers
- Spreaders
- Tow carts
- Lawn sweepers
- Other compatible tow-behind attachments
Instead of installing a connection that serves only one purpose, you are adding versatility to the machine itself.
Use it with The W.I.T.C.H.™ when distance shows up.
Use it with other compatible equipment when the job calls for it.
Compatibility, load ratings, hitch requirements, terrain, and the machine manufacturer’s instructions must always be confirmed before towing any attachment.
MORE VALUE FROM EVERY PART OF THE SETUP.
More Value From the Machine
The machine does more than carry the operator across the property.
It becomes part of the material-moving workflow and gains a versatile rear connection point for other compatible equipment.
More Value From the Wheelbarrow
The wheelbarrow keeps its tight-area access, maneuverability, and placement control while gaining machine-assisted transport over distance.
More Value From the Crew
Workers spend less time repeatedly pushing loaded wheelbarrows across the property and more time loading, transporting, and placing material.
More Value for the Owner
The business gains another capability without necessarily adding another dedicated powered machine.
EXPAND CAPABILITY. NOT THE EQUIPMENT LIST.
The W.I.T.C.H.™ is not another machine competing for space on the trailer.
It is a system that helps compatible equipment already on the trailer accomplish more.
Your machine supplies the power.
Your wheelbarrow carries the load.
The W.I.T.C.H.™ connects the two.
USE WHAT YOU ALREADY OWN.
MAKE IT CAPABLE OF MORE.