The W.I.T.C.H.™ stands for Wheelbarrow In Tow Conversion Hitch.

It is an Instant Connect and Release Wheelbarrow System that allows a compatible mower or off-road machine with an appropriate rear 2-inch receiver setup to tow a compatible wheelbarrow over distance, then release it for normal hand control, dumping, and final placement.

The machine handles the distance.

The wheelbarrow handles the placement.

This combines machine-powered transport with the maneuverability, controlled dumping, and placement precision of a traditional wheelbarrow.

Compatibility and safe use depend on the tow vehicle, receiver setup, wheelbarrow, load, terrain, slope, traction, balance, and operator control.

Making Wheelbarrows Fly.

Available exclusively at TheWitchHitch.com.

“Making Wheelbarrows Fly” means helping a wheelbarrow move across the jobsite with machine-powered speed instead of relying on a worker to push it the entire distance by hand.

With The W.I.T.C.H.™, a compatible mower or machine can tow a loaded wheelbarrow over the long portion of the route. The operator can then release the wheelbarrow and use it normally for controlled dumping, tight access, and final placement.

The wheelbarrow is not replaced and does not become a permanent cart.

It still handles the work it does best.

The difference is that the machine handles the distance.

This can help crews move repeated loads faster, reduce unnecessary long-distance pushing, preserve worker energy for placement and finish work, and complete material-moving jobs more efficiently.

The machine handles the distance.

The wheelbarrow handles the placement.

That is what we mean by Making Wheelbarrows Fly.

The Key-Bar is a 1-inch outside-diameter steel crossbar that mounts across the top of compatible wheelbarrow handles.

Its first purpose is to provide the connection point between the wheelbarrow and The W.I.T.C.H.™. But the Key-Bar also remains useful when the wheelbarrow is being operated normally by hand.

By tying the two handles together, the Key-Bar can help reduce excessive handle flex, improve stability, and give the operator additional grip and leverage when pushing, lifting, dumping, crossing curbs, or controlling the wheelbarrow through transitions.

Its hip-height position also gives the operator another way to start or move the wheelbarrow by engaging more of the legs, hips, back, and upper body instead of relying only on the hands, arms, and shoulders.

The Key-Bar does not replace proper lifting technique or safe load balance, but it can make a compatible wheelbarrow easier to control and more useful throughout the workday.

It is more than a connection part.

It is a practical wheelbarrow upgrade and the key to unlocking the full Connect and Release workflow.

No. The W.I.T.C.H.™ is built first and foremost as an Instant Connect and Release Wheelbarrow System, but its usefulness can extend beyond standard wheelbarrows.

With the proper compatible setup, crews may also use it with push blowers, tow carts, landscape carts, generators, toolboxes, and other approved or properly adapted jobsite equipment.

Different tools may connect in different ways. Wheelbarrows and compatible push blowers use the standard Connect and Release workflow, while compatible tow carts and wagons use Tow Cart Mode with the Cart Adapter. Other adapted tools may require their own approved connection method and operating guidance.

The advantage is not simply that The W.I.T.C.H.™ can tow different equipment.

The advantage is that it can help crews use one compact system for several material-moving and jobsite tasks while keeping the wheelbarrow as its primary identity.

Wheelbarrow for placement. Tow cart for volume. Compatible tools for added jobsite function.

Compatibility depends on the mower or machine and whether it has an appropriate rear 2-inch receiver setup.

If your mower already has a compatible rear 2-inch receiver, The W.I.T.C.H.™ may be ready to install using the correct extension and setup for that machine.

If it does not have a receiver, rear receiver mounts are currently available for select Wright Stander models, including certain LG, ZK2, and ZK3 configurations. Additional receiver options may also be available from other manufacturers for different mower makes, models, and years.

Because mower frames, model years, rear layouts, exhaust locations, suspension systems, and mounting points can vary, compatibility should always be confirmed by make, model, year, and receiver configuration before purchase.

We can help identify whether a compatible rear mount is available and where it may be purchased.

Once the mower is properly equipped with a rear 2-inch receiver, it may also be able to use many other compatible towing accessories and attachments, subject to the mower manufacturer’s ratings, warnings, and operating limits.

Towing compatible equipment should not damage a mower when the complete setup is properly rated, installed, balanced, maintained, and operated within the manufacturer’s limits.

The Maximum Tow Load is based on the lower safe rating between:

Tow Vehicle Rating — what the mower, tractor, ATV, UTV, or other tow vehicle is rated to tow.

Equipment Load Rating — what the wheelbarrow, tow cart, or other connected equipment is rated to carry or tow.

Always use the lower safe number, then adjust for terrain, slope, traction, load balance, tongue weight, ballast, receiver rating, speed, and operating conditions.

Damage can occur if the mower is overloaded, the receiver or mount is improperly installed, the load is poorly balanced, the setup contacts the ground, or the equipment is operated too fast or on unsuitable terrain.

The W.I.T.C.H.™ does not override the mower manufacturer’s towing limits, warnings, or operating instructions. Before use, confirm that the mower, receiver, mount, extension, The W.I.T.C.H.™, and connected equipment are all compatible and in good condition.

Terrain, slope, traction, load balance, tongue weight, and operating conditions may reduce the safe working load.

Like any working machine, your mower will experience normal wear over time. That is not the same as damage. You are using your equipment to get more done, save time, reduce fatigue, and make money.

Tow-behind carts, front-mounted dump carts, and The W.I.T.C.H.™ may all help move material, but they handle the job differently.

A tow-behind cart is designed primarily for higher-volume hauling. It remains attached during use and works best when the route is open and the material can be unloaded near the work area.

A front-mounted dump cart or bucket carries material on the mower itself. That can be useful for moving and dumping larger loads in open areas, but the mower’s footprint, load position, steering, traction, and access still affect where the material can be placed.

The W.I.T.C.H.™ is built around a different workflow.

It tows a compatible wheelbarrow over distance, then releases it for normal hand control, controlled dumping, tight access, and final placement.

The wheelbarrow or cart carries much of the load on its own wheel or wheels, while the tow vehicle provides pulling power. This differs from carrying the material on the front of the mower, where the load is supported by the machine.

Load position can affect steering, traction, balance, machine footprint, and control, but the exact effect depends on the mower, load, terrain, slope, ballast, speed, and setup.

The W.I.T.C.H.™ also supports Tow Cart Mode with the Cart Adapter when greater volume is needed.

Tow cart for volume.

Wheelbarrow for placement.

The W.I.T.C.H.™ keeps both workflows connected.

Its main advantage is not simply towing material.

It is preserving the ability to release the wheelbarrow and move material beyond the mower’s practical footprint, exactly where hand control and smaller controlled dumps are most useful.

Yes. The W.I.T.C.H.™ is made in the USA from heavy-duty steel and was developed by a working contractor for the demands of professional landscaping and material-moving work.

Its design is intentionally simple, compact, and low-maintenance, with durable steel components and replaceable wear parts. Routine inspection is still important, especially after heavy use or rough transport. Pins, bushings, fasteners, welds, springs, Key Bars, adapters, and connection points should be checked regularly and replaced if worn or damaged.

The greaseless pivot bushings are designed for extended service life. If wear eventually develops, the bushings and related components can be replaced rather than requiring replacement of the entire system.

Durability still depends on proper installation, reasonable care, correct load limits, suitable operating conditions, and avoiding impacts, overloading, ground strikes, or misuse.

The W.I.T.C.H.™ is backed by a 12-month limited warranty and a 60-Day Crew Efficiency Guarantee, subject to the applicable warranty, return, product-condition, packaging, and shipping requirements.

It is built to be a long-term professional tool crews can keep ready for repeated work—not a disposable attachment.

Available exclusively at TheWitchHitch.com.

To use The W.I.T.C.H.™, you need a compatible mower or machine with an appropriate rear 2-inch receiver setup, a compatible wheelbarrow, and a properly installed Key Bar.

The complete setup may include the rear receiver supplied by the equipment owner, the correct receiver extension or adapter, The W.I.T.C.H.™ vertical tube and cradle-base assembly, and the Key Bar mounted across the wheelbarrow handles.

The exact setup depends on the mower or machine, receiver height, ground clearance, wheelbarrow design, and intended operating mode.

If the machine does not already have a rear 2-inch receiver, a compatible receiver mount may be available from The W.I.T.C.H.™ or another equipment supplier. Compatibility should be confirmed by the machine’s make, model, year, and rear configuration before purchase.

For Tow Cart Mode, a compatible tow cart or wagon and the Cart Adapter are also required.

Safe use depends on correct installation, equipment ratings, load balance, terrain, slope, traction, ground clearance, and operator control.

No. The W.I.T.C.H.™ does not replace the wheelbarrow.

It preserves what makes the wheelbarrow useful and changes how it handles distance.

For short hauls, tight areas, controlled dumping, and final placement, a traditional wheelbarrow may still be the best tool for the job. When the pile or truck can be positioned close to the work area, ordinary hand use may be the fastest and simplest method.

When distance becomes the problem, The W.I.T.C.H.™ allows a compatible machine to tow the wheelbarrow over the long portion of the route, then release it for normal hand control.

The Key Bar also adds value when the wheelbarrow is not being towed. It can help reduce excessive handle flex, improve stability, provide additional grip and leverage, and keep the wheelbarrow ready for the Connect and Release workflow.

The wheelbarrow remains a wheelbarrow.

It simply becomes more capable.

Nothing beats a wheelbarrow.

Until distance shows up on the jobsite.

Yes. With multiple wheelbarrows and a crew of two or more, The W.I.T.C.H.™ can support a Wheelbarrow Conveyor™ workflow that keeps material moving with less waiting between loads.

One worker can keep wheelbarrows loaded at the truck, trailer, pile, or material source.

Another can tow full wheelbarrows to the placement area and return with empty ones.

A third worker, when available, can release, dump, place, and position empty wheelbarrows for pickup.

Additional crew members can focus on spreading, raking, and finish work so the flow of delivered material does not become the next bottleneck.

The value comes from keeping each person focused on a productive part of the workflow instead of having one worker load, push the full distance, dump, return empty, and repeat every step alone.

Crew members can also rotate positions to reduce repetitive strain and help maintain a steadier pace throughout the day.

The exact crew setup depends on the job, distance, material volume, access, terrain, and number of wheelbarrows available.

Load. Tow. Release. Place. Return. Repeat.

That is how multiple wheelbarrows can turn repeated material movement into a coordinated crew workflow.

The W.I.T.C.H.™ can work with loaders, conveyors, dump-body systems, multiple wheelbarrows, tow carts, and other material-handling tools by improving the part of the workflow between loading and final placement.

Systems such as Mulch Mate, SmartGate Conveyor, Mulch Mule, and compatible mini loaders can help fill wheelbarrows quickly at the material source.

The W.I.T.C.H.™ then helps move those loaded wheelbarrows over distance and release them near the work area for controlled dumping and final placement.

This creates a more efficient load-to-placement cycle:

Load. Tow. Release. Place. Return. Repeat.

The loading system handles filling.

The machine handles distance.

The wheelbarrow handles final placement.

On larger jobs, multiple wheelbarrows can keep the process moving continuously. Full wheelbarrows move out while empty wheelbarrows return for reloading, and crew members can focus on loading, towing, placing, spreading, and finish work.

This coordinated approach can create an Ultra-Efficient Conveyor System™ by reducing delays between loading, transport, and placement.

The W.I.T.C.H.™ does not replace loaders or conveyor systems.

It helps connect their loading speed to the wheelbarrow’s placement ability.

That is how separate tools can become one more efficient material-moving workflow.

Wheelbarrows and dump carts are already efficient tools, but they are most efficient under different conditions.

A wheelbarrow is highly effective for tight access, controlled dumping, uneven areas, and final placement. Its limitation appears when repeated long-distance pushing begins consuming time and worker energy.

A dump cart can move larger volumes efficiently across open routes. Its limitation appears when the cart remains attached, the machine cannot reach the final placement area, or the material must still be moved and spread after dumping.

The W.I.T.C.H.™ bridges those two parts of the job.

It allows a compatible machine to tow a wheelbarrow over distance, then release it for normal hand control and precise placement.

With the Cart Adapter, it can also support compatible tow carts when higher-volume hauling is the better choice.

The advantage is not that wheelbarrows or dump carts are inefficient.

The advantage is giving the crew the ability to choose the best tool for each part of the material path.

Wheelbarrow for placement.

Tow cart for volume.

Machine power for distance.

The W.I.T.C.H.™ keeps those workflows connected using equipment many crews already own.