How Do You Mulch?

SLOW → FASTER → ULTRA-EFFICIENT

See How Different Tools and Workflows Can Save Your Crew Time, Effort, and Energy

Every job is different.

One property may include a combination of:

  • Short wheelbarrow runs and long-distance hauls

  • Tight, hard-to-reach areas and wide-open spaces

  • Smooth pavement, soft turf, hills, gates, and ramps

  • Areas a machine can reach and areas only a wheelbarrow can access

The most efficient method may change from one part of the job to the next.

What Is Ultra-Efficiency?

Ultra-efficiency does not mean forcing one machine or tool to perform every part of the job.

It means using the best method for:

  • Loading

  • Distance

  • Access

  • Final placement

  • Empty Return

The goal is to keep material moving with fewer interruptions, less unnecessary walking, and less repeated effort.

Short Runs

Residential Beds, Curbside Work, and Nearby Placement Areas

SLOW

  • Carrying material with buckets

  • Moving material with shovels or pitchforks

  • Repeated hand carrying between the pile and placement area

FASTER

  • Standard wheelbarrow

For short distances, a regular wheelbarrow may be all the job needs.

ULTRA-EFFICIENT

  • Wheelbarrow equipped with the Key-Bar for improved handling, leverage, and control

  • Mini loader or skid steer carrying material directly from loading to dumping when access, surface conditions, and machine footprint allow

The W.I.T.C.H.™ is not needed for every short trip.

When pushing is faster, push it.

Long Runs Through Open Areas

Large Properties, Parking Areas, Campuses, and Widely Separated Beds

SLOW

  • Repeatedly pushing loaded wheelbarrows over the full distance

  • Moving the truck, trailer, or material source closer to each work area

FASTER

  • Front-mounted carts

  • Loaders or skid steers

  • Other machine-carried containers where the machine can reach the dumping area

These methods improve travel speed but may be limited by machine footprint, turning room, surface conditions, or final-placement access.

ULTRA-EFFICIENT

  • The W.I.T.C.H.™ with multiple wheelbarrows in rotation

  • Tow full wheelbarrows to the placement area

  • Release them for controlled dumping and spreading

  • Return with empty wheelbarrows

This creates a Wheelbarrow Conveyor™ Workflow:

Load. Tow. Release. Place. Return. Repeat.

Long Runs Into Tight Spaces

Distance Combined With Gates, Narrow Access, Beds, and Limited Machine Reach

SLOW

  • Pushing loaded wheelbarrows over the entire route by hand

FASTER

  • Electric wheelbarrow

An electric wheelbarrow reduces pushing effort, but the operator still walks the entire distance with every load.

ULTRA-EFFICIENT

  • The W.I.T.C.H.™ Connect and Release Wheelbarrow System

  • Use the machine for the long, open portion of the route

  • Release before the machine’s footprint becomes a disadvantage

  • Use the wheelbarrow normally through gates, around plants, and into tight placement areas

Tow for speed. Release for access. Place with wheelbarrow control.

Long Runs With Hills, Ramps, or Deep Placement

Distance Combined With a Difficult Final Section

SLOW

  • Manually pushing a loaded wheelbarrow across the full route and through the hill, ramp, or difficult placement area

FASTER

  • Electric wheelbarrow

The powered wheelbarrow helps with hills and ramps, but the operator still walks the complete route and uses battery power during the long approach.

  • The W.I.T.C.H.™ with a standard wheelbarrow

The machine handles the long distance, but the operator must still manually control and push the wheelbarrow through the final hill, ramp, or difficult section.

ULTRA-EFFICIENT

  • Electric wheelbarrow paired with The W.I.T.C.H.™

  • Tow the powered wheelbarrow over the long machine-suitable distance

  • Release it before the hill, ramp, gate, or restricted placement area

  • Preserve battery power for the section where powered assistance provides the greatest value

Tow the distance. Save the battery for the difficult part.

All equipment, routes, slopes, surfaces, loads, and operating conditions must remain within the applicable ratings and instructions for the complete setup.

Loading Is the Next Part of the Workflow

Choosing the right way to move the wheelbarrow solves only part of the job.

Every load must first be placed into the wheelbarrow.

Once travel distance and final placement have been improved, faster loading may remove the next bottleneck.

Loading Material

SLOW

  • Loading wheelbarrows by hand from a pile or trailer with shovels, pitchforks, fork rakes, or bags

  • Pulling material from a dump body and loading each wheelbarrow manually

FASTER

  • Loader or mini skid steer feeding wheelbarrows from a material pile

  • Conveyor system dispensing material directly into wheelbarrows

ULTRA-EFFICIENT

  • Loader or conveyor system paired with The W.I.T.C.H.™

  • Drive up with the wheelbarrow connected, fill it, and continue without unnecessary disconnection

  • Support a fast, repeatable single-operator loading and towing workflow when the equipment and job layout permit

Faster loading matters because a transportation system cannot remain productive if the wheelbarrow is waiting to be filled.

The complete workflow must keep loading, travel, placement, and Empty Return moving together.

The Complete Ultra-Efficient Workflow

From Loading to Final Placement

ULTRA-EFFICIENCY AT A NEW LEVEL

  • A conveyor or loader fills the wheelbarrow

  • The W.I.T.C.H.™ uses machine power for the long travel portion

  • The wheelbarrow releases for normal access and placement

  • An electric wheelbarrow provides powered assistance through hills, ramps, or deep placement areas

  • Empty wheelbarrows return and reenter the workflow

Conveyor or Loader

+ Electric Wheelbarrow

+ The W.I.T.C.H.™

Each tool handles the part of the job it performs best.

The loader or conveyor handles loading.

The machine handles distance.

The electric wheelbarrow handles difficult powered placement.

The wheelbarrow handles access, controlled dumping, and final placement.

The result is not simply a faster wheelbarrow trip.

It is a more complete material-moving workflow.

The W.I.T.C.H.™ Connects the Workflow

The W.I.T.C.H.™ does not replace the wheelbarrow.

It does not replace loaders, conveyors, electric wheelbarrows, or skilled crew members.

It connects machine-powered transportation with normal wheelbarrow access and placement control.

That allows crews to select the right method for each part of the property instead of forcing one tool to perform the entire job.

The machine handles the distance.

The wheelbarrow handles the placement.

The W.I.T.C.H.™ can help crews:

  • Reduce unnecessary loaded-wheelbarrow pushing

  • Preserve normal wheelbarrow access

  • Improve movement between loading and placement

  • Use multiple wheelbarrows more effectively

  • Pair familiar equipment into a more productive workflow

  • Keep material moving as job conditions change

Work Faster. Use Less Unnecessary Effort. Keep the Material Moving.

Ease of use . . . that is just a bonus.